Large scale carbothermal synthesis of submicron silicon nitride powder
Serge Grenier · container not stated · 1992
Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.
· OpenAlex · dissertation · 1992
Abstract
The synthesis of silicon nitride (Si$ sb3$N$ sb4$) by carbothermal reduction of silica was sensitive to the processing steps used for the starting materials (SiO$ sb2$, C) and to the reaction conditions. A good degree of intimacy between the starting materials was required in order to obtain fine ceramic powders. The formation of Si$ sb3$N$ sb4$ was known to occur over a narrow temperature range (1450-1550$ sp circ$C). The morphology of the silicon nitride powder produced was also shown to vary widely depending on the reaction temperature. The amount and morphology of the silicon carbide formed was sensitive to impurities present in the precursors prior to the reaction.
The nitrogen flow rate during reaction as well as the position of pellets in the reactor played a key role in the final SiC content of the powder. Results showed that the strength values of two carbothermal powders were excellent (507 and 577 MPa) considering their lower sintered densities which was the result of residual carbon present in the powder. (Abstract shortened by UMI.)
Open the resolved locator · 10.82308/13232
Metadata licence: OpenAlex metadata (CC0)