go-v.orgdoi

Microstructural Evolution in Commercial Ni-based Alloys under Irradiation

Li-Jen Yu · Deep Blue (University of Michigan) · 2020

  • DOI 10.7302/54
  • Publisher University of Michigan
  • Type dissertation
  • Issued 2020

Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.

Deep Blue (University of Michigan) · University of Michigan · dissertation · 2020

Abstract

Lifetime extensions of current light water reactors and operational conditions of future advanced reactors involve higher irradiation damage levels, elevated service temperatures, and more aggressive corrosion conditions, and place greater burdens on reactor structural components. Hence, maintaining safe reactor operation requires that selected structural materials should sustain these harsh service conditions, and consequently that we understand microstructure and property changes that might take place during service.

Commercial Ni-based superalloys continue to be considered for nuclear applications due to their superior mechanical properties and corrosion resistance at relevant reactor service temperatures. Specifically, Alloy 625, Alloy 625 Plus, and Alloy 690 are proposed for use as in-core reactor components. However, little is known about their precipitation behavior under irradiation.

This study aims to quantify irradiated microstructures developing in three commercial Ni-based alloys (Alloy 625, Alloy 625 Plus, and Alloy 690) after ion and proton irradiations, to clarify the underlying mechanisms controlling microstructural evolution, and to extrapolate the findings to neutron irradiation and reactor conditions. Transmission electron microscopy and atom probe tomography investigations indicated that the irradiated microstructures result from competing cascade mixing and radiation-enhanced diffusion. In addition to irradiation conditions, alloy composition, via thermodynamic driving force and kinetics, plays a significant role in controlling microstructural evolution.

While the starting alloy state, i.e. solutionized or aged, may influence phase decomposition pathways, the precipitate microstructures eventually converged to non-equilibrium steady states with constant averaged size and number density defined by temperature and dose rate. Specifically, precipitation toward a non-equilibrium steady state nanoscale patterning and solute segregation were observed in alloys after lower dose rate proton irradiation, while higher dose rate ion irradiation led to randomization of all solute distributions.

In addition, different cavity evolution and phases were observed in these alloys, confirming the importance of chemistry in controlling precipitation driving force and point defect behavior.

Open the resolved locator · 10.7302/54

Metadata licence: OpenAlex metadata (CC0)

Registry
OpenAlex DOI index + API
Fetched
2026-11-19 23:56 UTC
Cache state
not cached yet (bulk-index+openalex)
Locator
https://hdl.handle.net/2027.42/166131
Metadata licence
OpenAlex metadata (CC0)
Scope
Metadata as returned by the resolver; abstracts are never generated here.