INFLUENCE OF HEAT TREATMENTS ON THE MICROSTRUCTURE AND TENSILE BEHAVIOUR OF SELECTIVE LASER MELTING-PRODUCED TI-6AL-4V PARTS
Gerrit Matthys Ter Haar, Thorsten Hermann Becker, Deborah Clare Blaine · The South African Journal of Industrial Engineering · 2016
Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.
The South African Journal of Industrial Engineering · Stellenbosch University · article · 2016
Abstract
In industry, post-process heat treatments of Ti-6Al-4V are performed with the aim of improving its tensile behaviour. While heat treatments of wrought Ti6Al4V have been standardised (e.g., Aerospace Material Specification H-81200), heat treatments of selective laser melting (SLM)-produced Ti-6Al-4V lacks research and understanding. Significant concern exists about SLM Ti6-Al-4V’s achievable ductility attributed to its martensitic (α’) phase. In this research, heat treatments at a range of temperatures are applied to SLM-produced Ti-6Al-4V tensile samples.
Microstructural analysis (both optically and through electron backscatter diffraction) was used to identify links between heat treatments and microstructure. Subsequently, uniaxial tensile tests were performed to determine the respective tensile properties of all samples. Correlations in the data show a significant loss in strength with respect to an increase in annealing temperature due to grain growth, while no noticeable trend was observed for fracture strain with regard to annealing temperatures.Â
Open the resolved locator · 10.7166/27-3-1663
Metadata licence: OpenAlex metadata (CC0)