Ultrasonic NDE for Real-Time Monitoring of Vulcanization in Nitrile Butadiene Rubber
Debasis Datta, Subhasis Mondal · e-Journal of Nondestructive Testing · 2026
Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.
e-Journal of Nondestructive Testing · NDT.net GmbH & Co. KG · article · 2026
Abstract
Nitrile Butadiene Rubber (NBR), due to its outstanding resistance against wear in chemicals, is widely used in industry. Additives like carbon black, silica powder, accelerators are mixed in the uncured rubber and the rubber mixture is then vulcanized to make it usable for practical applications. Both experimental and simulation-based investigations are crucial for monitoring the vulcanization (curing) process and predicting the effects of different additives in rubber. Ultrasonic inspection is one of the most accepted approaches to characterize the curing process in a non-destructive manner.
In the present research, real-time monitoring of the vulcanization process of NBR compounds, mixed with additives stated before is done ultrasonically using an in-house setup furnished with an ultrasonic transducer, a delay-line and a heater assembly. Temporal variation of ultrasonic wave velocity and relative attenuation are tracked in real-time and are compared with cure rates measured by the equilibrium swelling method.
Open the resolved locator · 10.58286/33232
Metadata licence: OpenAlex metadata (CC0)