00_README-1.txt
Hassan Flity, Lucas Terrei, Zoubir Acem, Gilles Parent · Recherche Data Gouv France · 2026
Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.
Recherche Data Gouv France · OpenAlex · dataset · 2026
Abstract
Cone calorimeter tests were carried out on eight wood species (Balsa, Poplar, Fir, Spruce, Larch, Oak, Beech, and Ipe) under an inert atmosphere. To maintain this atmosphere during the tests, the samples were placed inside a dedicated stainless steel chamber. A continuous argon flow rate of 20 L·min⁻¹ ensured that the oxygen concentration inside the chamber remained below 5%, thereby preventing char oxidation. In-depth temperature measurements were also performed using embedded thermocouples for each wood species at incident heat fluxes of 35 and 45 kW·m⁻².
The in-depth temperatures were measured at twelve locations: 2, 4, 6, 8, 10, 12, 14, 16, 18, 20, 30, and 40 mm below the exposed surface. The measurement technique developed by Terrei et al. [2] was adopted. Thermocouple installation consisted of cutting each wood sample perpendicular to the exposed surface and machining 0.2 × 0.2 mm² square grooves at the desired locations. Type K thermocouples were welded by autogenous electric welding and inserted into the grooves. The two halves of the samples were then bonded using either melamine–urea–formaldehyde (MUF) or resorcinol adhesive, depending on the wood species.
Open the resolved locator · 10.57745/ci0vb7
Metadata licence: OpenAlex metadata (CC0)