go-v.orgdoi

Tungsten Carbide as an Reinforcement in Structural Oxide-Matrix Composites

Zbigniew Pędzich · InTech eBooks · 2012

  • DOI 10.5772/51183
  • Publisher OpenAlex
  • Type book-chapter
  • Issued 2012

Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.

InTech eBooks · OpenAlex · book-chapter · 2012

Abstract

The possibility of serious improvement of mechanical properties of oxide ceramics by particulate composites manufacturing has been recently recognized very well. Among oxide ceramics, tetragonal zirconia solid solutions and α-alumina phase are the most important materials, widely used in structural applications, due to their good properties. The fabrication of two-phase particulate composites could be the simplest way to the mechanical properties improvement. Despite a wide range of alumina-zirconia composites, non-oxide particles were also often utilized as strengthening agents.

Many phases were introduced into zirconia and alumina matrices – TiC, SiC, WC, TiB2, TiN, AlN, (Ti,W)C, Cr2O3, Cr7C3, and metals – nickel, molybdenum and tungsten and others [1-17]. In this way, the materials with improved properties, when compared with “pure” matrix materials, were obtained. Depending on the type of inclusions, their size and amount as well as sintering conditions, one can achieve a significant improvement of hardness, stiffness, fracture toughness and/or strength of the material. It was also reported that the decrease of inclusion size to the nanometric scale allowed extremely high values of flexural strength and fracture toughness to be achieved.

Open the resolved locator · 10.5772/51183

Metadata licence: OpenAlex metadata (CC0)

Registry
OpenAlex DOI index + API
Fetched
2026-11-19 23:37 UTC
Cache state
not cached yet (bulk-index+openalex)
Locator
https://www.intechopen.com/chapters/41528
Metadata licence
OpenAlex metadata (CC0)
Scope
Metadata as returned by the resolver; abstracts are never generated here.