go-v.orgdoi

Optimization and Simulation for Ceramic Injection Mould of ZrO2 Fiber Ferrule

Bin Lin, Meiming Zhang, Chuhan Wu, Feng Liu · InTech eBooks · 2012

  • DOI 10.5772/36934
  • Publisher OpenAlex
  • Type book-chapter
  • Issued 2012

Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.

InTech eBooks · OpenAlex · book-chapter · 2012

Abstract

Fiber ferrule is a crucial part for manufacturing fiber connectors. It is fairly difficult to produce fiber ferrule because that it requires high dimension accuracy. Currently, YTZ ceramic powder is the main material used to produce fiber ferrule and Ceramic Injection Molding (CIM) is a new fabricating method capable of producing ZrO2 fiber ferrule (Fig. 1(a), Fig. 1(b)) with complex geometry and high accuracy. ZrO2 fiber ferrule quality is significantly influenced by the process conditions of CIM. Therefore, the main focus of this paper is to optimize mould structure and processing parameters based on the simulation of CIM, which promotes solid load of ceramic powder and product quality.

Optimal process conditions of Ceramic Injection Molding could be determined by analyzing the simulation results. It has been found that runner cross-section shape and runner system contribute to the efficiency and filling process significantly. Hence, optimal runner cross-section shape and runner system are proposed. Reducing the gravity influence on CIM is also suggested. Moreover, optimization of cooling system could be considered an effective way to improve the dimensional precision and surface quality of ZrO2 fiber ferrule.

Open the resolved locator · 10.5772/36934

Metadata licence: OpenAlex metadata (CC0)

Registry
OpenAlex DOI index + API
Fetched
2026-11-19 23:02 UTC
Cache state
not cached yet (bulk-index+openalex)
Locator
https://www.intechopen.com/chapters/33649
Metadata licence
OpenAlex metadata (CC0)
Scope
Metadata as returned by the resolver; abstracts are never generated here.