Application of 3D Simulation Methods to the Process of Induction Heating of Rail Turnouts
E. Szychta, Leszek Szychta, Mirosaw Luft, Kamil Kirag · InTech eBooks · 2012
Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.
InTech eBooks · OpenAlex · book-chapter · 2012
Abstract
IntroductionKeeping turnouts fully functional is necessary for safety of both train passengers and personnel operating railroads, particularly in winter.This is of particular importance since turnouts, key railroad elements, are exposed to adverse weather conditions.Proper function of turnouts is obstructed by snow falling between the point and the rail and between components of the setting lock which, combined with low ambient temperatures, causes the point to freeze to the sliding chairs and the components of the setting lock to freeze.This leads to blocking of a turnout 1 .Effective protection of turnouts against such weather conditions greatly reduces accident rates and improves efficiency of rail traffic.The presented methods of heating railway turnouts all over the World are designed to prove operation efficiency turnouts during the winter.The authors set the goal of work to develop a new method of heating railway turnouts, using an inductive heating phenomenon.To do that it is necessary to know the properties of magnetic and electric rails.These properties are not explicitly specified by the manufacturers of rails, so the determination of their value by the laboratory tests is required.The chapter discusses the measurement methods used to determine the basic properties of electric and magnetic rails.Based on laboratory results a simulation model of inductive heating rails in 3D space is developed.In the final part of the chapter results of a simulation model tests are presented and discussed.
Contemporary methods of turnout heatingMethods of clearing snow and ice have evolved in line with the state of engineering art, weather conditions in a region as well as availability and costs of energy sources.The most common methods of heating turnouts in Europe include 2 : gas heating, water heating, used in smaller rail facilities, mainly in Germany.The first systems of this type in Poland were installed at Boguszów station, geothermal heating, 1 Kiraga K., Szychta E., Andrulonis J. (2010).Wybrane metody ogrzewania rozjazdów kolejowychartykuł przegl dowy 2 Brodowski D., Andrulonis J. (2002).Ogrzewanie rozjazdów kolejowych, Problemy kolejnictwa www.intechopen.
Open the resolved locator · 10.5772/36917
Metadata licence: OpenAlex metadata (CC0)