go-v.orgdoi

Fracture Behaviour of Controlled-Rheology Polypropylenes

Alicia Salazar, Jess Rodrguez · InTech eBooks · 2012

  • DOI 10.5772/36331
  • Publisher OpenAlex
  • Type book-chapter
  • Issued 2012

Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.

InTech eBooks · OpenAlex · book-chapter · 2012

Abstract

IntroductionThe combination of economy, unique properties and ease of recycling offered by polypropylene (PP) leads to its widespread use as a commodity in the food and medical packing, automobile, furniture and toy industries (Karger-Kocsis, 1995;Pasquini, 2005).Some of these applications put stringent demands on PP properties to achieve the final commercial end-uses.PP produced in conventional reactors by fourth generation Ziegler Natta catalyst system presents relatively high molecular weight (M w ) and broad molecular weight distribution (MWD).These features cause high melt viscosity which makes them unsuitable for commercial end-uses such as fiber spinning, blown film and extruded and injection-molded thin-walled products.The MWD largely determines the rheological properties of polypropylene melts and many physical properties.Therefore, this parameter must be controlled to improve the material response during processing and to achieve the diversity in polymer grades suitable for the d i f f e r e n t a p p l i c a t i o n s o f p o l y p r o p y l e n e .C o n t r o l o f M W D o f P P c a n b e d o n e i n t h e conventional reactor through improvement in the polymerization technology or via a postreactor operation in the original PP with high M w and broad MWD by means of different degradation methods.The former is not profitable because it requires the addition of chain terminators and transfer agents which normally leads to decrease the output and increase the cost.Instead, the latter technique, such as reactive extrusion, consists of incorporating peroxides to induce controllable degradation of PP chains which efficiently results in polymers with tailor made properties.The polypropylenes prepared this way are termed "Controlled-Rheology Polypropylenes" (CRPP) and they have superior processing properties due to reduced M w and narrowing MWD (Asteasuain et al.,

Open the resolved locator · 10.5772/36331

Metadata licence: OpenAlex metadata (CC0)

Registry
OpenAlex DOI index + API
Fetched
2026-11-19 22:46 UTC
Cache state
not cached yet (bulk-index+openalex)
Locator
https://www.intechopen.com/chapters/30969
Metadata licence
OpenAlex metadata (CC0)
Scope
Metadata as returned by the resolver; abstracts are never generated here.