Laser Probe 3D Cameras Based on Digital Optical Phase Conjugation
Zhiyang Li · InTech eBooks · 2012
Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.
InTech eBooks · OpenAlex · book-chapter · 2012
Abstract
A camera makes a picture by projecting objects onto the image plane of an optical lens, where the image is recorded with a film or a CCD or CMOS image sensor. The pictures thus generated are two-dimensional and the depth information is lost. However in many fields depth information is getting more and more important. In industry the shape of a component or a die, needs to be measured accurately for quality control, automated manufacturing, solid modelling, etc. In auto-navigation, three dimensional coordinates of changing environment need to be acquired in real-time to aid auto path planning for vehicles or intelligent robots.
In driving assistant systems any obstacle in front a car should be detected within 0.01 second. Even in making 3D movies for true 3D display in the near future, three dimensional coordinates need to be recorded with a fame rate of at least 25f/s, etc. For the past few decades intensive researches have been carried out and various optical methods have been investigated[Chen, et al., 2000], yet they still could not fulfil every requirement of present-day applications on either measuring speed, or accuracy, or measuring range/area, or convenience, etc.
For example, although interferometric methods provide very high measuring precision [Yamaguchi, et al., 2006; Barbosa, & Lino, 2007], they are sensitive to speckle noise and vibration and perform measurement over small areas. The structured light projection methods provide good precision and full field measurements [Srinivasan, et al., 1984; Guan, et al., 2003], yet the measuring width is still limited to several meters. Besides they often encounter shading problems.
Stereovision is a convenient means for large field measurements without active illumination, but stereo matching often turns very complicated and results in high reconstruction noise [Asim, 2008].To overcome the drawbacks improvements and new methods appear constantly. For example, time-of-flight (TOF) used to be a point-to-point method [Moring, 1989]. Nowadays commercial 3D-TOF cameras are available [Stephan, et al., 2008]. Silicon retina sensors have also been developed which supports event-based stereo matching [Jurgen & Christoph, 2011].
Among all the efforts those employing cameras appear more desirable because they are non-contact, relatively cheap, easy to carry out, and provide full field measurements, etc.
Open the resolved locator · 10.5772/28366
Metadata licence: OpenAlex metadata (CC0)