go-v.orgdoi

Alternative Reconstruction Method and Object Analysis in Digital Holographic Microscopy

Francisco Palacios, Oneida Font, Jorge Ricardo, Guillermo Palacios, Mikiya Muramatsu, Diogo Soga, Daniel Francisco Palacios, J. Valin, Freddy Monroy · InTech eBooks · 2011

  • DOI 10.5772/17568
  • Publisher OpenAlex
  • Type book-chapter
  • Issued 2011

Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.

InTech eBooks · OpenAlex · book-chapter · 2011

Abstract

Advanced Holography -Metrology and Imaging 184 spherical aberration (Stadelmaier & Massig, 2000), astigmatism (Grilli et al., 2001) and anamorphism (De Nicola et al., 2005).Compensation of aberrations is fundamental when quantitative phase determination is used in microscopic metrological applications.Several approaches have been proposed to remove the aberrations.A method proposed by Cuche (Cuche et al., 1999) used a single hologram, which involved the computation of a digital replica of the reference wave depending on two reconstruction parameters.A double-exposure technique (Ferraro et al., 2003) can compensate completely the inherent wave front curvature in quantitative phase contrast imaging, although it needs two hologram recordings with and without the sample and a subtraction procedure between the two holograms.In the paper (Colomb et al., 2006) the authors developed a method to compensate the tilt aberration by recording a hologram corresponding to a blank image to compute the first-order parameters directly from the hologram.However, the method is limited to selecting profiles or areas known to be flat in the hologram plane.A method was proposed by Miccio (Miccio et al., 2007) who performed a two-dimensional fitting with the Zernike polynomials of the reconstructed unwrapped phase, although the application of the method is limited to be the special case of thin objects.For image reconstruction different algorithms have been developed.Among them, the Single Fourier Transform Formulation (SFTF) (Schnars, 1994), the convolution-based algorithm (CV) (Demetrakopoulos & Mittra, 1974) and the angular spectrum-based algorithm (ASA) (Yu & Kim, 2005) are most commonly used.The SFTF algorithm is fast and can be used with objects larger than a CCD.However, variation of the size of the reconstructed image as result of a change in the reconstruction depth poses problems in applications such as reconstruction of color holograms (Yamaguchi et al., 2002) and particle sizing (Pan & Meng, 2003).In contrast, the CV algorithm keeps the size of the reconstructed image the same as that of the CCD.However, it is applicable only to objects that are smaller than the CCD.In addition, when the CV algorithm is used for objects much smaller than a CCD, it degrades the image quality, since the image is represented by only a small number of pixels.The CV algorithm was extended to large objects by zero padding the holograms before reconstruction (Kreis et al., 1997).This approach, however, led to an increase in computational load.To avoid a number of limitations of the previous algorithms, the double Fresnel-transform algorithm (DBFT) that allows the reconstruction of digital holograms with adjustable magnification was developed (Zhang et al., 2004).This algorithm involves two reconstruction steps implemented by a conventional single Fourier-transform algorithm.Through the adjustment of the distance parameter in the first stages, it is possible to control the size of the reconstructed images, independent of distance and wavelength, even for objects larger than a CCD without any computational penalty.The method of image reconstruction proposed here is similar to the DBFT algorithm, since we also use two steps for image reconstruction, but they differ in the objectives and meaning of the two steps.Our formulation is specific for digital holographic microscopy; this way the objective of the first stage is the calculation of the objects' Fourier transform plane, where the complex wavefield contains all the information about the phase and intensity of object wavefield.Then, the second step is to reconstruct the complex amplitudes of the image wavefield starting from the objects' Fourier transform plane.We will describe and show advantages of the proposed method.

Open the resolved locator · 10.5772/17568

Metadata licence: OpenAlex metadata (CC0)

Registry
OpenAlex DOI index + API
Fetched
2026-11-19 22:50 UTC
Cache state
not cached yet (bulk-index+openalex)
Locator
https://www.intechopen.com/chapters/23233
Metadata licence
OpenAlex metadata (CC0)
Scope
Metadata as returned by the resolver; abstracts are never generated here.