go-v.orgdoi

Development of Ceramic Cam Roller Follower for Engine Application

Kazuhisa Kitamura, Hiroaki Takebayashi, Mitsuhiro Ikeda, H. Michael Percoulis · SAE technical papers on CD-ROM/SAE technical paper series · 1997

  • DOI 10.4271/972774
  • Publisher SAE International
  • Type conference-paper
  • Issued 1997

Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.

SAE technical papers on CD-ROM/SAE technical paper series · SAE International · conference-paper · 1997

Abstract

This paper describes the development of the ceramic cam roller follower manufactured from silicon nitride. The impact strength of the ceramic roller was investigated and proven to have sufficient strength and reliability for use in automotive engine applications. Motor simulation tests were conducted in order to study the best design for the ceramic cam roller. Results from testing show that super finishing of the roller surface is necessary in order to prevent severe wear of the metal shaft and cam. Optimum bearing clearance range was also studied. Performance tests were conducted in order to study the wear properties of the ceramic cam roller.

Wear of the tested cam shaft when using the ceramic roller, was less than the conventional steel roller, even though the calculated contact stress was higher. The total amount of wear of the valve train components was significantly reduced when using the ceramic cam roller, when compared to the conventional steel roller. The ceramic cam roller is especially suitable for use in diesel engine applications, which require higher wear resistance and reliability in the valve train system.

Open the resolved locator · 10.4271/972774

Metadata licence: OpenAlex metadata (CC0)