go-v.orgdoi

The Effect of Transfer Port Geometry on Scavenge Flow Velocities at High Engine Speed

Martin Ekenberg, Bengt Johansson · SAE technical papers on CD-ROM/SAE technical paper series · 1996

  • DOI 10.4271/960366
  • Publisher SAE International
  • Type conference-paper
  • Issued 1996

Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.

SAE technical papers on CD-ROM/SAE technical paper series · SAE International · conference-paper · 1996

Abstract

2-D LDV measurements were performed on two different cylinder designs in a fired two-stroke engine running with wide-open throttle at 9000 rpm. The cylinders examined were one with open transfer channels and one with cup handle transfer channels. Optical access to the cylinder was achieved by removing the silencer and thereby gain optical access through the exhaust port. No addition of seeding was made, since the fuel droplets were not entirely vaporized as they entered the cylinder and thus served as seeding. Results show that the loop-scavenging effect was poor with open transfer channels, but clearly detectable with cup handle channels.

The RMS-value, “turbulence”, was low close to the transfer ports in both cylinders, but increased rapidly in the middle of the cylinder. The seeding density was used to obtain information about the fuel concentration in the cylinder during scavenging.

Open the resolved locator · 10.4271/960366

Metadata licence: OpenAlex metadata (CC0)

Registry
OpenAlex DOI index + API
Fetched
2026-11-19 21:20 UTC
Cache state
not cached yet (bulk-index+openalex)
Locator
https://doi.org/10.4271/960366
Metadata licence
OpenAlex metadata (CC0)
Scope
Metadata as returned by the resolver; abstracts are never generated here.