Cyclic Variations in a Lean-Burn Spark Ignition Engine Without and With Swirl
James Hunter Whitelaw, Hongming Xu · SAE technical papers on CD-ROM/SAE technical paper series · 1995
Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.
SAE technical papers on CD-ROM/SAE technical paper series · SAE International · conference-paper · 1995
Abstract
Measurements of cylinder pressure and flame travel velocity have been obtained in a single cylinder engine with two arrangements of port geometry and with mixture equivalence ratios from 0.68 to 0.9. They are complemented by photographs of the flame development and measurements of local velocity. The investigation compares the combustion processes in terms of the maximum pressure, flame speed and in-cylinder flow velocity without and with an intake shroud which increased both the tumble and swirl ratios. The extent to which residual burned gas retarded the combustion rate and increased cyclic variability are quantified.
The photographic studies confirm the dominant effect of the swirling flow on flame propagation and deviations of the flame kernel from spherical as the air-fuel ratio is increased, with much higher probability of influence of velocity fluctuations. Port injection of the gaseous fuel is shown to lead to results identical to those with premixed fuel and air introduced into the manifold.
Open the resolved locator · 10.4271/950683
Metadata licence: OpenAlex metadata (CC0)