go-v.orgdoi

Recent Developments in Press Formability of Aluminum Alloy Sheets for Automotive Panels

Yasuharu Sakuma, Matsuo Usuda, Toshio Komatsubara, Mamoru Matsuo · SAE technical papers on CD-ROM/SAE technical paper series · 1993

  • DOI 10.4271/930705
  • Publisher SAE International
  • Type conference-paper
  • Issued 1993

Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.

SAE technical papers on CD-ROM/SAE technical paper series · SAE International · conference-paper · 1993

Abstract

Aluminum alloy sheets are used for automotive body-panels, but their small Young's modulus results in inferior shape-fixability than conventionally-applied steel sheets with similar strengths. Smaller radius of curvature, indicating better shape-fixability, is found at the center of a panel press-formed with higher blank holder force (BHF). Higher force can be applied for press-forming of alloy sheets with larger strain-hardening exponent (n value) induced by an increased addition of Mg.

Recently-developed 5000 series alloy sheets containing 5.5 pct Mg and 0.3 pct Cu have an elongation over 33 pct at an ultimate tensile strength of 270 MPa and can be press-formed with better shape-fixability.

Open the resolved locator · 10.4271/930705

Metadata licence: OpenAlex metadata (CC0)