go-v.orgdoi

Development and Use of LDV and Other Airflow Measurement Techniques as a Basis for the Improvement of Numerical Simulation of Engine Compartment Air Flows

Helmut Berneburg, Antonello Cogotti · SAE technical papers on CD-ROM/SAE technical paper series · 1993

  • DOI 10.4271/930294
  • Publisher SAE International
  • Type conference-paper
  • Issued 1993

Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.

SAE technical papers on CD-ROM/SAE technical paper series · SAE International · conference-paper · 1993

Abstract

Modern vehicles require a low aerodynamic drag to minimize fuel consumption. A not negligible share of the overall CD-value of a vehicle is produced by the engine compartment air flow. Therefore this share has also to be optimized. Furthermore, customer wishes for higher powered engines as well as for more safety and comfort result in more tightly packed engine compartments. Even the reduction of pass-by-noise required by legal reasons is often achieved with the help of underbody covers which in turn affect the engine compartment flow. All these items may lead to rising underhood temperatures.

To reduce the development time of new vehicles, numerical simulations of engine compartment air flow are more and more used to predict high temperature fields and to show ways to develop suitable remedies in the concept phase of the vehicle development. The experimental basis for such codes is provided by aerodynamic investigations in a wind tunnel. At least the three components of local velocities and the volumetric air flow at the inlet and the outlet plane have to be determined.

This paper first reports the development and the use of a modern aerodynamic “Test Radiator” for the investigation of velocity distribution and for the volumetric air flow measurements through a car cooling package. For this purpose air vanes of small diameter, able to detect even reverse flows, are used. Furthermore, the development of various LDV-techniques, suitable for the investigation of complex flow fields, for instance behind a rotating fan are reported. And a newly developed 3-D miniature-probe is shown.

The influence of various cooling configurations, with/without condenser in front of the radiator, and with stationary/rotating puller fan and with/without vehicle speed is also shown.

Open the resolved locator · 10.4271/930294

Metadata licence: OpenAlex metadata (CC0)

Registry
OpenAlex DOI index + API
Fetched
2026-11-20 13:20 UTC
Cache state
not cached yet (bulk-index+openalex)
Locator
https://doi.org/10.4271/930294
Metadata licence
OpenAlex metadata (CC0)
Scope
Metadata as returned by the resolver; abstracts are never generated here.