Development of a New Light-Weight Suspension Coil Spring
Takayuki SAKAKIBARA, Wataru Kusakari, Osamu Nakano, Shigeru YASUDA, Atsushi Sugimoto, Manabu Watanabe · SAE technical papers on CD-ROM/SAE technical paper series · 1993
Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.
SAE technical papers on CD-ROM/SAE technical paper series · SAE International · conference-paper · 1993
Abstract
This newly developed helical spring can be used at a stress level up to 1300 MPa. The material is composed of Fe-C-Si-Mn-Ni-Cr-Mo-V alloy. Its strength-toughness balance was greatly superior to that of other spring steels. To improve the fatigue strength at a higher stress level, decarburization at the surface upon austenitizing was severely controlled, applying induction heating. Then, a special shot peening process, introduced for the first time, was applied to obtain a surface residual stress at the surface of over 1000 MPa. The spring was first applied to a 1992 TOYOTA model car.
Plans are to increase the use since the spring material achieves a weight reduction of at least 30 % and, possibly, 35 to 40 %.
Open the resolved locator · 10.4271/930263
Metadata licence: OpenAlex metadata (CC0)