Investigation of a Spark-Assisted Diesel Engine
Ramkrishna Phatak, Kunihiko Komiyama · SAE technical papers on CD-ROM/SAE technical paper series · 1983
Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.
SAE technical papers on CD-ROM/SAE technical paper series · SAE International · conference-paper · 1983
Abstract
A single-cylinder, open-chamber direct-injection (OCDI) diesel engine was converted to low compression ratio, spark-assisted operation. A modular construction cylinder head was built for the test work. The research work indicated that on a typical OCDI diesel engine, several spark plug locations are possible to produce successful ignition of a wide range of fuels. Performance tests were run with different compression and swirl ratio combinations. The best combination was found to be 12.2 compression ratio and 10 swirl ratio. The spark-assisted engine (CR 16:1) was performance tested with methanol and DF-2 plus 20% methanol emulsified fuel.
The spark was always required with methanol, however, with emulsified fuel spark was desirable for starting and warming up periods. The investigation suggested the feasibility of economically developing multi-fuel spark-assisted diesel engines.
Open the resolved locator · 10.4271/830588
Metadata licence: OpenAlex metadata (CC0)