go-v.orgdoi

Modifications on the Intake Ports with the Aim to Reduce the Noise of a Two-Stroke-Crankcase-Scavenged Engine

Klaus Groth, Norbert Kania · SAE technical papers on CD-ROM/SAE technical paper series · 1982

  • DOI 10.4271/821069
  • Publisher SAE International
  • Type conference-paper
  • Issued 1982

Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.

SAE technical papers on CD-ROM/SAE technical paper series · SAE International · conference-paper · 1982

Abstract

One of the dominant noise sources of small two-stroke-cycle and crankcase-scavenged engines (port covered and uncovered by the working piston) represents the intake noise. The opening and closing of the port of these engines which are used to drive chain saws causes intake oscillations of big amplitudes. These are an important part of the total noise with regard to the point of measurement at the ear of the saw operator. By using a special intake port shape and the advancing of the port opening the gradient of the cross section course is reduced.

The reduction of the total noise level is about 2–4 dB (A) as a function of the speed at full load while the delivery rate and the output remain constant.

Open the resolved locator · 10.4271/821069

Metadata licence: OpenAlex metadata (CC0)