Vapour-liquid equilibrium under hydrocracking conditions - 2. results from runs 86 -CG -14 to 17
I S Sambi, David J. Patmore · container not stated · 1987
Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.
· OpenAlex · report · 1987
Abstract
In a previous report a thermodynamic method for predicting the vapour-liquid equilibrium (VLE) for a hydrocarbon system containing hydrogen and methane was discussed and a computer program based on that method was described. The VLE results from run 86-CG-202 were discussed and compared with the predictions of an available thermodynamic method. The results obtained for runs 86-CG-14 to 17 from pilot plant 1 are presented. Feedstock 30-IPPL-84 containing 98.8 wt % pitch was used as in run 86-CG-202 discussed in a previous report. Runs 14 to 17 were carried out with high gas to liquid ratio and an antifoam agent was also used for runs 14 to 16.
The vapour liquid data were collected with the hot separator at 375°C and system pressure of 13.89 MPa (2000 psig). The equilibrium ratios (K-values) were calculated from observed plant data and are compared with the predicted values. Other methods available in the PROCESS simulation software for evaluating the thermodynamic properties of liquid fractions as well as for predicting the K-values were evaluated. A simulation of the pilot plant light end cold receiver, light end and heavy end product drums was carried out. This identified some of the areas for further improvement in the accuracy of VLE data.
Open the resolved locator · 10.4095/304331
Metadata licence: OpenAlex metadata (CC0)