Performance of Cleanroom Garment Fabrics When Processed in an Industrial Laundry: Cleanroom Undergarments and Non-Sterile Outer Garments
Davey Stoker, Jamie Kelly, Andrew Edwards · European journal of parenteral & pharmaceutical sciences · 2025
Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.
European journal of parenteral & pharmaceutical sciences · OpenAlex · article · 2025
Abstract
Cleanroom apparel forms a primary barrier between personnel and the manufacturing environment. Despite the widespread use of reusable garments, there are limited peer‑reviewed studies describing their performance through repeated industrial laundering and wear cycles. EU GMP Annex 1 requires reusable garments to be replaced based on qualification studies, rather than visual inspection alone. This study characterises the through‑life performance of a non‑sterile outer garment constructed from WF5505JG non-sterile cleanroom fabric and three cleanroom undergarment fabrics (Buxton, Carsington, Sandwash), in order to derive evidence‑based replacement intervals.
Garments from multiple users, across multiple use cases, were processed using validated laundry workflows and tested across defined process counts. Performance attributes included durability (tensile strength), particulate shedding (Helmke drum), and colour stability by colorimetry (ΔE). For undergarments a repair frequency analysis was also conducted. WF5505JG non-sterile outer cleanroom garments were assessed between 0 and 150 processes; and the three cleanroom undergarments were assessed at 0–80 (Buxton); 0–150 (Carsington); 0–200 (Sandwash) processes.
The WF5505JG non-sterile outer garments maintained a high performance to approximately 110 processes, beyond which tensile strength and particle release trended adversely. For undergarments, the recommended replacement intervals were Buxton=60 processes, Carsington=120 processes, and Sandwash=150 processes. These lifetime processing thresholds balance the containment performance and the durability of the garment systems. The lifecycle qualification in this study supports objective, fabric‑specific replacement policies for reusable cleanroom apparel, consistent with EU GMP Annex 1.
The data provide practical limits that can be embedded in cleanroom facility quality systems to mitigate contamination risks and control costs.
Open the resolved locator · 10.37521/ejpps30403
Metadata licence: OpenAlex metadata (CC0)