go-v.orgdoi

Replication data for: Spray Drying of Double-Layer Emulsion Stabilised with an Orange Residue: Effect of Process Parameters and Collection Position

Susana Simal, Mónica M. Umaña, Esperanza Dalmau, Carmen Rosselló, Valeria Soledad Eim · CORA.Repositori de Dades de Recerca · 2026

  • DOI 10.34810/data3346
  • Publisher Consorci de Serveis Universitaris de Catalunya
  • Type dataset
  • Issued 2026

Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.

CORA.Repositori de Dades de Recerca · Consorci de Serveis Universitaris de Catalunya · dataset · 2026

Abstract

This dataset contains the tabular data and raw microscopy images generated in a study on the spray drying of a double-layer oil-in-water emulsion stabilised with orange residue flour (ORF), soy protein and maltodextrin. The objective of the study was to evaluate how spray-drying process conditions affect the properties of the obtained powders and the properties of the emulsions after reconstitution. The dataset allows users to interpret and reuse the data associated with Table 2, Figure 5 and Figure 10 of the article, as well as the raw optical microscopy and scanning electron microscopy images used to support microstructural observations.

The study investigated the impact of spray-drying conditions, specifically inlet air temperature (Tin: 131–159 ◦C) and feed rate (FR: 4.9–8.4 g/min), on the microencapsulation of oil in a double-layer emulsion stabilised with orange residue flour (ORF) and soy protein. Powders were analysed separately from the drying chamber and the collector, focusing on yield, encapsulation efficiency, moisture, water activity (aw), oil oxidation, colour, and particle size. Chamber powders were more sensitive to Tin, where higher temperatures (155–159 ◦C) improved yield (up to 47% dry matter (dm)) but also increased oxidation (up to 134% above initial oil).

Excessively high FR (8.4 g/min) reduced yield and raised aw (up to 0.39). Collector powders showed more stable yields (average 30 ± 2% dm) but lower encapsulation efficiency (80–86% for chamber vs. 70–77% for collector). Response surface methodology satisfactorily modelled key parameters (R2 up to 0.9). Optimisation showed that chamber performance was maximised at 146 ◦C and 4.9 g/min (predicted yield and aw of 41% and 0.25, respectively), while collector quality improved with slightly higher Tin (150 ◦C, predicted aw of 0.32). Separately analysing chamber and collector fractions provided novel insights into spray-drying dynamics. These findings highlight ORF as a promising wall material.

Open the resolved locator · 10.34810/data3346

Metadata licence: OpenAlex metadata (CC0)

Registry
OpenAlex DOI index + API
Fetched
2026-11-20 01:18 UTC
Cache state
not cached yet (bulk-index+openalex)
Locator
https://dataverse.csuc.cat/dataset.xhtml
Metadata licence
OpenAlex metadata (CC0)
Scope
Metadata as returned by the resolver; abstracts are never generated here.