go-v.orgdoi

Analyse théorique du phénomène de renflement à la sortie de la buse lors de l'extrusion d'une fonte de verre silicocalcique alcaline : 2ème partie. Résultats des calculs et comparaison avec les données expérimentales

Norbert Achten, E. Roeder · RENATE · 1983

  • DOI 10.34657/17511
  • Publisher Technische Informationsbibliothek (TIB)
  • Type article
  • Issued 1983

Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.

RENATE · Technische Informationsbibliothek (TIB) · article · 1983

Abstract

With the aid of the computer model described in part 1 of the present paper [2] the thickening of the rod observed in the extrusion of rod from an alkali-lime-silica glass melt was calculated approximately for circular cross-sections. Besides the distribution of the streamlines and the profile of the rod together with the final diameter, the axial and radial velocities and the pressure distribution in the channel of the die and in the emerging rod were determined and are shown graphically. The influences of extrusion temperature and thus viscosity as well as extrusion pressure were investigated.

The available data are used to provide an explanation of the occurrence of swelling at the orifice. Comparison of experimental and calculated rod diameters showed a relative discrepancy of less than 5 %. This shows that the numerical method used is suitable for the solution of the problem.

Open the resolved locator · 10.34657/17511

Metadata licence: OpenAlex metadata (CC0)

Registry
OpenAlex DOI index + API
Fetched
2026-11-20 03:50 UTC
Cache state
not cached yet (bulk-index+openalex)
Locator
https://oa.tib.eu/renate/handle/123456789/18491
Metadata licence
OpenAlex metadata (CC0)
Scope
Metadata as returned by the resolver; abstracts are never generated here.