DOI · e01.org

Influence of the Gas Bubble Size Distribution on the Ladle Stirring Process

Mengkun Li, Lintao Zhang · Processes · 2020

  • DOI 10.3390/pr8121663
  • Publisher Multidisciplinary Digital Publishing Institute
  • Type article
  • Issued 2020

Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.

Processes · Multidisciplinary Digital Publishing Institute · article · 2020

Abstract

This work aims at figuring out the influence of gas bubble size distribution on the ladle stirring process. The work is conducted through three-dimensional (3D) numerical simulation based on the finite volume method. Mesh sensitivity test and the cross-validation are performed to ensure the results are mesh independent and the numerical set-up is correct. Two distributions, uniform and Log-normal function, are investigated under different gas flow rates and number of porous plugs. The results indicate that the results, e.g., the axial velocity and the area of the slag eye, have little difference for low flow rate.

The difference becomes dominant whilst the flow rate is increasing, such as 600 NL/min. The Log-normal function bubble size distribution gives a larger axial velocity and a smaller slag eye area compared to the uniform bubble size distribution. This work indicated that, at a higher flow rate, the Log-normal function is a better choice to predict the melt behavior and the slag open eye in the ladle refining process if the bubble interaction is not considered.

Open the resolved locator · 10.3390/pr8121663

Metadata licence: OpenAlex metadata (CC0)

Registry
OpenAlex DOI index + API
Fetched
2026-11-19 20:19 UTC
Cache state
not cached yet (bulk-index+openalex)
Locator
https://doi.org/10.3390/pr8121663
Metadata licence
OpenAlex metadata (CC0)
Scope
Metadata as returned by the resolver; abstracts are never generated here.