go-v.orgdoi

Evaluation of CADI Low Alloyed with Chromium for Camshafts Application

Alejandro Cruz‐Ramírez, Eduardo Colin García, José Federico Chávez Alcalá, Jaime Téllez Ramírez, Antonio Magaña Hernández · Metals · 2022

  • DOI 10.3390/met12020249
  • Publisher Multidisciplinary Digital Publishing Institute
  • Type article
  • Issued 2022

Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.

Metals · Multidisciplinary Digital Publishing Institute · article · 2022

Abstract

Different processing routes have been developed to increase the strength and hardness of camshafts for automotive applications. In this work, two carbidic austempered ductile irons (CADIs), alloyed with 0.2 and 0.4 wt% Cr, were evaluated to determine their suitability in the camshaft production by microscopy techniques and mechanical tests. The CADIs were produced at austempering temperatures of 265 and 305 °C, during 30, 60, 90, and 120 min. The microstructural characterization was carried out by optical microscopy, while Rockwell C Hardness, tensile, Charpy impact, and block-on-ring wear loss tests were evaluated for mechanical characterization from the camshaft and standard keel block.

The volume fraction of high-carbon austenite was determined for the heat treatment conditions by X-ray diffraction measurements. The process window was found in the range from 60 to 120 min, for both austempering temperatures, while the highest amount of ausferrite was obtained at 90 min. The formation of carbides was increased as the chromium content was increased. The highest hardness (49 HRC) and wear resistance (0.252 mm3) were obtained for the lower austempering temperature (265 °C, 90 min) and higher chromium content (0.4%).

The highest austempering temperature (305 °C, 90 min) and lowest chromium content (0.2%) allow for obtaining the highest toughness (22.91 J) and elongation (4.2%), while the highest tensile strength (1027 MPa) was obtained for the CADI containing 0.2% Cr heat-treated to 265 °C.

Open the resolved locator · 10.3390/met12020249

Metadata licence: OpenAlex metadata (CC0)

Registry
OpenAlex DOI index + API
Fetched
2026-11-20 03:33 UTC
Cache state
not cached yet (bulk-index+openalex)
Locator
https://doi.org/10.3390/met12020249
Metadata licence
OpenAlex metadata (CC0)
Scope
Metadata as returned by the resolver; abstracts are never generated here.