Effect of the inclination angle of finned cylinder over a BFS on the MHD behavior in the presence of a nanofluid
Djamila Derbal, Mohamed Bouzit, Fayçal Bouzit · Metallurgical and Materials Engineering · 2022
Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.
Metallurgical and Materials Engineering · Association of Metallurgical Engineers of Serbia · article · 2022
Abstract
The present numerical study is based on the forced magnetohydrodynamic (MHD) convection of a ferrofluid through a backward facing step (BFS). A cylinder with two fixed fins and fixed dimensions is implanted inside fluid. The dimensionless governing equations have been solved using the multigrid finite element method. Several parameters were considered, such as the Hartmann number 0≤ Ha ≤100, the magnetic field inclination angle 0°≤ ɣ ≤90°, the Reynolds number 10≤ Re ≤200, the nanoparticle volume fraction 0%≤ φ ≤10%, and the fins inclination angle 0°≤ a ≤180°.
The results have shown that the presence of the fins improves the heat transfer, especially at the position a = 90° where the Nuave number increases with a ratio of 113% for Re = 200.
Open the resolved locator · 10.30544/760
Metadata licence: OpenAlex metadata (CC0)