go-v.orgdoi

Effect of the position of parallelogram ribs in micro channel on heat transfer using diamond nanoparticles

Kamel Chadi, Nourredine Belghar, Mokhtar Falek, Zied Driss, Belhi Guerira · Metallurgical and Materials Engineering · 2020

  • DOI 10.30544/537
  • Publisher Association of Metallurgical Engineers of Serbia
  • Type article
  • Issued 2020

Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.

Metallurgical and Materials Engineering · Association of Metallurgical Engineers of Serbia · article · 2020

Abstract

In the present work, we have studied numerically three dimensions, the impact of the position of parallelogram ribs in a micro-channel on thermal exchange. In this study, we proposed three cases of micro-channel heat sinks with parallelogram ribs. As well as one case without ribs, in each of the three cases, we varied the parallelogram rib positions on the micro-channel. The main purpose of this study is to find the best position for parallelograms ribs in which the heat dissipation is useful for improving the thermal performance of the micro-channel as well as improving the cooling of electronic components. We have chosen silicon micro-channel drains for four cases.

Constant heat flux is applied to the bottom surfaces and using a nanofluid diamond-water with 5% volume concentration of diamond nanoparticle as a coolant. The simulation has been carried out using the commercial software ANSYS-Fluent. Reynolds number (Re) has been taken between 200 and 400 with the corresponding inlet velocity from 1.53 m/s to 3.01 m/s, and the flow regime has been assumed to be stationary.

The numerical results show that the parallelogram ribs position of the micro-channel in the second case gave an improvement in heat exchange, where the Nusselt number is higher than in the other cases, and showed a reduction in the temperature of the heated bottom wall compared to the other cases. Also, the micro-channel shape in the second case can be used to cool the electronic components. The results also showed that with increasing Reynolds number (Re), the friction factor of the micro-channel decreases in all cases. At the same time, we find the lowest value of the thermal resistance in the second case and the biggest value in the first case, base micro-channel without ribs.

Open the resolved locator · 10.30544/537

Metadata licence: OpenAlex metadata (CC0)