The influence of solution annealing on microstructure and mechanical properties heat-resistant cast Steel HK30 modified by Niobium
Alen Delić, Mirsada Oruč, Milenko Rimac, Almaida Gigović-Gekić, Raza Sunulahpašić · Metallurgical and Materials Engineering · 2019
Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.
Metallurgical and Materials Engineering · Association of Metallurgical Engineers of Serbia · article · 2019
Abstract
In this paper, the room temperature mechanical properties, as well as the microstructure of HK 30 Nb steel, were tested in the initial as-cast and solution annealed condition. Results show that tensile properties after the solution annealing have a slightly lower value than as-cast samples. Microstructural analysis of samples after solution annealing showed dissolution of primary carbides present in the initial as-cast condition. The morphology and composition of carbides were changed during a solution annealing.
Analysis of microstructure was done by optical microscopy (OM) and scanning electron microscope (SEM), whereas hardness and tensile tests were performed for characterization of mechanical properties.
Open the resolved locator · 10.30544/430
Metadata licence: OpenAlex metadata (CC0)