A preliminary investigation on microstructure and mechanical properties of dissimilar Al to Cu friction stir welds prepared using silver interlayer
Shaileshkumar Pandya, Jyoti V. Menghani · Metallurgical and Materials Engineering · 2018
Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.
Metallurgical and Materials Engineering · Association of Metallurgical Engineers of Serbia · article · 2018
Abstract
Due to its solid-state nature, friction stir welding (FSW) process can be considered a better alternative for dissimilar welding metals. However, like fusion welding techniques, in friction stir welding growth of thick layers of brittle intermetallics - Cu9Al4 and CuAl2 is a significant issue. One solution to this problem is the use of the suitable interlayer material. Use of interlayer material modifies the joint microstructure with the replacement of thick, brittle intermetallics by more ductile intermetallics in a thin layer or particle form. The present study is a preliminary investigation about joining of AA6082-O to pure copper joints with and without silver (Ag) wire interlayer.
Friction stir welded joints were characterized regarding optical microscopy, X-Ray Diffraction (XRD) analysis, microhardness measurement, tensile testing and Scanning Electron Microscopy (SEM) based fractography. The Al-Cu weld prepared using silver interlayer was stronger than without it. The higher strength of the weld with silver interlayer is attributed to the formation of a composite type of structure with intercalation of more ductile Ag2Al intermetallics along with dispersion of Ag particles in stir zone.
Open the resolved locator · 10.30544/294
Metadata licence: OpenAlex metadata (CC0)