go-v.orgdoi

Effect of deformation on densification and corrosion behavior of Al-ZrB2 composite

Sai Mahesh Yadav Kaku, Asit Kumar Khanra, Maharajan Joseph Davidson · Metallurgical and Materials Engineering · 2017

  • DOI 10.30544/264
  • Publisher Association of Metallurgical Engineers of Serbia
  • Type article
  • Issued 2017

Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.

Metallurgical and Materials Engineering · Association of Metallurgical Engineers of Serbia · article · 2017

Abstract

In the present investigation, aluminium based metal matrix composites (MMCs) were produced through powder metallurgical route. Different composites were processed by adding different amount of ZrB2 (0, 2, 4 and 6 wt. %) at three aspect ratios of 0.35, 0.5, and 0.65, respectively. The powder mixture was compacted and pressureless sintered at 550 °C for 1 h in controlled atmosphere (argon gas). The relative density of the sintered preforms was found to be 90%, approximately. Sintered preforms are used as workpiece materials for deformation study at different temperatures in order to find the effect of temperature on the densification behaviour.

Potentio-dynamic polarization studies were performed on the deformed preforms to find the effect of mechanical working. The corrosion rate was found to decrease with increase in deformation.

Open the resolved locator · 10.30544/264

Metadata licence: OpenAlex metadata (CC0)