go-v.orgdoi

Tensile properties and fracture mechanism of IN-100 superalloy in high temperature range

Milan T. Jovanovic, Đorđe Drobnjak, Ivana Cvijović‐Alagić, Vesna M. MAKSIMOVIĆ · Metallurgical and Materials Engineering · 2017

  • DOI 10.30544/239
  • Publisher Association of Metallurgical Engineers of Serbia
  • Type article
  • Issued 2017

Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.

Metallurgical and Materials Engineering · Association of Metallurgical Engineers of Serbia · article · 2017

Abstract

Tensile properties and fracture mechanism of a polycrystalline IN-100 superalloy have been investigated in the range from room temperature to 900°C. Optical microscopy (OM) and transmission electron microscopy (TEM) applying replica technique were used for microstructural investigation, whereas scanning electron microscopy (SEM) was utilized for fracture study. High temperature tensile tests were carried out in vacuumed chamber. Results show that strength increases up to 700°C, and then sharply decreases with further increase in temperature. Elongation increases very slowly (6-7.5%) till 500°C, then decreases to 4.5% at 900°C.

Change in elongation may be ascribed to a change of fracture mechanism. Appearance of a great number of microvoids prevails up to 500°C resulting in a slow increase of elongation, whereas above this temperature elongation decrease is correlated with intergranular crystallographic fracture and fracture of carbides.

Open the resolved locator · 10.30544/239

Metadata licence: OpenAlex metadata (CC0)