go-v.orgdoi

MEASURMENT OF BENDING PROPERTIES OF RHIZOPHORA TROPICAL WOOD

Sinin Hamdan, Mahbub Hasan, Yoann Nohe · ASEAN Journal on Science and Technology for Development · 2017

  • DOI 10.29037/ajstd.253
  • Publisher OpenAlex
  • Type article
  • Issued 2017

Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.

ASEAN Journal on Science and Technology for Development · OpenAlex · article · 2017

Abstract

The Young’s modulus, load at the yield point and proportional limit stress from the compression bending (cb) test were compared with the four point bending tests (4pb). The theoretical Young’s modulus are larger than the real reading for 5mm and 10mm thick specimens, except for 200mm long specimens due to specimen nonlinearity. The experimental results for the short specimens are slightly high compared to the theory due to uniaxial compression in both tensile and compressive planes.

Since the additional deflection produced by the shearing force and the stress concentration at the loading point was smaller with the compression bending test compared to the conventional four point bending test the values of Ecb are larger than E4pb. It is noted that when length/thickness (l/t)>80, the values of Ecb are scattered. In addition, Ecb decrease sharply when l/t<30. In order to obtain a stable Young’s modulus value, it is suggested that the l/t should be 30~80.

Open the resolved locator · 10.29037/ajstd.253

Metadata licence: OpenAlex metadata (CC0)

Registry
OpenAlex DOI index + API
Fetched
2026-11-20 17:32 UTC
Cache state
not cached yet (bulk-index+openalex)
Locator
http://doi.org/10.29037/ajstd.253
Metadata licence
OpenAlex metadata (CC0)
Scope
Metadata as returned by the resolver; abstracts are never generated here.