go-v.orgdoi

The characterization of brewing waste and feasibility of its use for the production of porous ceramics

Nancy Esther QUARANTA, Marta Graciela Caligaris, Gisela Guadalupe PELOZO, M. Unsen, Adrián A. Cristóbal · WIT transactions on ecology and the environment · 2016

  • DOI 10.2495/wm160271
  • Publisher WIT Press
  • Type conference-paper
  • Issued 2016

Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.

WIT transactions on ecology and the environment · WIT Press · conference-paper · 2016

Abstract

During brewing large amounts of organic solid waste, including bagasse, yeast, malt and hops residues, among others are formed.The objective of this work is to study this waste and analyse the feasibility of its use as pore-forming material in the manufacture of porous ceramics.The residues from the production of craft beer consist of wet solid waste resulting from the separation by filtration after the mixtures maceration.This material was dried and then characterized using various techniques.Porous ceramic pieces were obtained from green bodies manufactured with mixtures of commercial clay with 10% in volume of residue, formed by uniaxial pressure of 25MPa, with the addition of 6% in weight of water.After a drying period, the samples were heat treated at 950°C following curves similar to those used in the ceramic industry.The compacts were characterized with different techniques.The obtained products have good physical and mechanical properties, with values of porosity, modulus of rupture, permanent volumetric variation and weight loss on ignition, within the range required in the market.The study of the feasibility of using this waste as a porosity former in ceramic tiles indicates that it is possible to use them without modifying the usual conditions of the industry, since the organic material incorporated combusted leaving a very low proportion of inorganic material that does not modify the diagrams with major oxides which remain being those of the clay used as main raw material, and these combustions are slow enough to allow sintering without deformation of the samples.

Open the resolved locator · 10.2495/wm160271

Metadata licence: OpenAlex metadata (CC0)

Registry
OpenAlex DOI index + API
Fetched
2026-11-20 00:47 UTC
Cache state
not cached yet (bulk-index+openalex)
Locator
https://doi.org/10.2495/wm160271
Metadata licence
OpenAlex metadata (CC0)
Scope
Metadata as returned by the resolver; abstracts are never generated here.