Prediction of engineering properties of recycled aged rubberized mixes using GPC
S.-J. Lee, H. Kim, Serji N. Amirkhanian, Kyoung‐Woong Kim · WIT transactions on the built environment · 2008
Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.
WIT transactions on the built environment · WIT Press · conference-paper · 2008
Abstract
The recycling of aged rubberized mixes has been an area of interest since crumb rubber modifier (CRM) was first used to modify asphalt binders in hot mix asphalt pavements over 40 years ago.This paper presents the relationship between molecular sizes of recycled aged CRM binders and the engineering properties of recycled aged CRM mixtures.Gel permeation chromatography was utilized to characterize the molecular size change of CRM binders depending on three aging levels and four reclaimed asphalt concrete (RAP) percentages.CRM mixtures were artificially long-term aged in the laboratory, and the aged CRM mixtures were recycled at 0, 15, 25, and 35% using typical recycling guidelines.Specimens of recycled aged CRM mixtures were tested for indirect tensile strength (ITS) in dry and wet conditions, rutting resistance, resilient modulus, and ITS after long-term aging in the laboratory.The results indicated that the compositional changes of recycled aged CRM binders have good correlations with the engineering properties of recycled aged CRM mixtures.Also, the empirical prediction models were developed, and the predicted values showed a high correlation with the properties of recycled aged CRM mixtures.
Open the resolved locator · 10.2495/ut080461
Metadata licence: OpenAlex metadata (CC0)