Comparison of sodium and calcium based sorbents for the dry treatment of flue gas from waste-to-energy plants
Boleslav Zach, Michael Pohořelý, Michal Šyc, Karel Svoboda, M. Punčochář · WIT transactions on ecology and the environment · 2016
Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.
WIT transactions on ecology and the environment · WIT Press · conference-paper · 2016
Abstract
This paper is focused on the properties of sodium and calcium based sorbents in relation to simultaneous dry flue gas treatment from SO 2 , HCl, NO x , solid particles and polychlorinated dibenzodioxins and dibenzofurans (PCDD/F).The most important differences between the two sorbent types are: the effect of temperature and moisture of flue gas on the sorption process, reactivity towards individual acid components in the flue gas (thermodynamic equilibrium and kinetics), and solubility of air pollution control residues.Also stoichiometric excess and mass of dosed sorbent is important for the comparison.The paper also presents new experimental unit for testing of complex flue gas treatment on catalytic filter elements.In this process, sorbent and reduction agent (for selective catalytic reduction of NOx) are dosed in the flue gas.Solid particles (fly ash and sorbent) form a filter cake on the surface of the filter elements.The flue gas has to pass through the filter cake where the acid components react with the sorbent.Subsequently, relatively clean gas continues to the catalytic layer of the filter element.On the catalytic layer, NO x is reduced by reduction agent (e.g.NH 3 ) and PCDD/Fs are destroyed (oxidised) by residual oxygen in the flue gas.On this unit, simultaneous removal of SO 2 , HCl, NO x , solid particles and PCDD/F can be studied.
Open the resolved locator · 10.2495/eq160271
Metadata licence: OpenAlex metadata (CC0)