go-v.orgdoi

BEM Computations Of A Finite-length AcousticHorn And Comparison With Experiment

Thomas H. Hodgson, R.L. Underwood · WIT transactions on the built environment · 1997

  • DOI 10.2495/comac970211
  • Publisher WIT Press
  • Type article
  • Issued 1997

Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.

WIT transactions on the built environment · WIT Press · article · 1997

Abstract

Classical horn theory calculates the throat impedance to predict the performance of a finite length horn by using the exit boundary condition that the impedance there is that of a rigid piston in an infinite baffle. Historically such calculations have not seemed to produce good correlation between the radiated pressure response in the far-field and the calculated throat impedance. In this re-examination of horn theory, the throat impedance is calculated for a finite three-dimensional exponentially-flared horn by the Boundary Element Method representing the hom boundaries by planar elements.

The calculated impedance, for the without and with finite-baffle cases, is compared with the classical theory and computed far-field response. The computed results are also compared with a novel measurement technique for measuring the throat acoustic impedance using a fiber-optic probe for determining the loudspeaker driver motion. It is shown that there is excellent correlation between the frequency peaks in the far-field pressure and the throat impedance both for the BEM calculations and for the experimental measurements.

Open the resolved locator · 10.2495/comac970211

Metadata licence: OpenAlex metadata (CC0)