go-v.orgdoi

Fabrication of Tungsten-UO 2 Hexagonal-Celled Fuel-Element Configurations

R.R. Goetsch, P. W. Cover, P.J. Gripshover, W.J. Wilson · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · 1964

  • DOI 10.2172/972756
  • Publisher Office of Scientific and Technical Information
  • Type report
  • Issued 1964

Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.

OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · Office of Scientific and Technical Information · report · 1964

Abstract

The gas-pressure-bonding process is being evaluated as a means of fabricating tungsten-UO 2 hexagonal-celled fuel geometries. A two-part study was initiated to optimize the fuel materials and to develp the required fixturing and loading techniques. Production of fueled tungsten-coated UO 2 particles in in progress so that geometries embodying coated particles or coated particles plus fine tungsten powder can be evaluated. Tests to data have shown the rquirement for a pretreatment in which a gaseous oxide phase is removed. Initial loading and fixturing procedures were proven satisfactory by the fabrication of a 19-cylindrical-hole hexagonal-type composite.

Open the resolved locator · 10.2172/972756

Metadata licence: OpenAlex metadata (CC0)

Registry
OpenAlex DOI index + API
Fetched
2026-11-19 21:33 UTC
Cache state
not cached yet (bulk-index+openalex)
Locator
https://www.osti.gov/errors/error429.html
Metadata licence
OpenAlex metadata (CC0)
Scope
Metadata as returned by the resolver; abstracts are never generated here.