go-v.orgdoi

High Strain-Rate Response of High Purity Aluminum at Temperatures Approaching Melt

Stephen Grunschel, Rodney J. Clifton, Tifeng Jiao · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · 2010

  • DOI 10.2172/972425
  • Publisher Office of Scientific and Technical Information
  • Type report
  • Issued 2010

Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.

OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · Office of Scientific and Technical Information · report · 2010

Abstract

High-temperature, pressure-shear plate impact experiments were conducted to investigate the rate-controlling mechanisms of the plastic response of high-purity aluminum at high strain rates (10{sup 6} s{sup -1}) and at temperatures approaching melt. Since the melting temperature of aluminum is pressure dependent, and a typical pressure-shear plate impact experiment subjects the sample to large pressures (2 GPa-7 GPa), a pressure-release type experiment was used to reduce the pressure in order to measure the shearing resistance at temperatures up to 95% of the current melting temperature.

The measured shearing resistance was remarkably large (50 MPa at a shear strain of 2.5) for temperatures this near melt. Numerical simulations conducted using a version of the Nemat-Nasser/Isaacs constitutive equation, modified to model the mechanism of geometric softening, appear to capture adequately the hardening/softening behavior observed experimentally.

Open the resolved locator · 10.2172/972425

Metadata licence: OpenAlex metadata (CC0)

Registry
OpenAlex DOI index + API
Fetched
2026-11-19 21:33 UTC
Cache state
not cached yet (bulk-index+openalex)
Locator
https://doi.org/10.2172/972425
Metadata licence
OpenAlex metadata (CC0)
Scope
Metadata as returned by the resolver; abstracts are never generated here.