Suitability of Silica Gel to Process INEEL Sodium Bearing Waste - Letter Report
Robert John Kirkham, Alan Keith Herbst · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · 2000
Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.
OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · Office of Scientific and Technical Information · report · 2000
Abstract
The suitability of using the silica gel process for Idaho National Engineering and Environmental Laboratory (INEEL) sodium bearing waste was investigated during fiscal year 2000. The study was co-funded by the Tanks Focus Area as part of TTP No. ID-77WT-31 and the High Level Waste Program. The task also included the investigation of possible other absorbents. Scoping tests and examination of past work showed that the silica gel absorption/adsorption and drying method was the most promising; thus only silica gel was studied and not other absorbents.
The documentation on the Russian silica gel process provided much of the needed information but did not provide some of the processing detail so these facts had to be inferred or gleaned from the literature.
Open the resolved locator · 10.2172/910751
Metadata licence: OpenAlex metadata (CC0)