go-v.orgdoi

Laser ultrasonic furnace tube coke monitor. Quarterly technical progress report. Report No. 5 for reporting period May 1, 1999 through August 1, 1999

Harvest Energy Technology, Sun Valley, California (US) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · 1999

  • DOI 10.2172/760366
  • Publisher Office of Scientific and Technical Information
  • Type report
  • Issued 1999

Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.

OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · Office of Scientific and Technical Information · report · 1999

Abstract

The overall aim of the project is to demonstrate the performance and practical use of a probe for measuring the thickness of coke deposits located within the high-temperature tubes of a thermal cracking furnace. The objective of work during this period was to enhance the sensitivity and signal-to-noise ratio of the probe measurement. Testing identified that the primary source of signal noise was traced to imperfections in the sacrificial stand-off, which was formed using a casting procedure. Laminations, voids, and impurities contained in the casting result in attenuation and dispersion of the ultrasonic signal.

This report describes the work performed to optimize the signal conductance of the sacrificial stand-off.

Open the resolved locator · 10.2172/760366

Metadata licence: OpenAlex metadata (CC0)