Elastic and plastic strains and the stress corrosion cracking of austenitic stainless steels. Progress report, April 30, 1976--December 30, 1976
Alexander R. Troiano · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · 1977
Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.
OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · Office of Scientific and Technical Information · report · 1977
Abstract
The influence of homogeneous (uniaxial tension) and heterogeneous (rolling) deformation on the SCC of a transformable (301) and a nontransformable (310) stainless steel in 30 percent MgCl/sub 2/ has been under study. The amount or type of deformation with or without the presence of deformation induced martensite did not appear to influence the electrochemical parameters such as the rest potential or the critical cracking potential.
Metallographic studies combined with failure tests and polarization curves identified the pitting potential with the critical cracking potential and indicated that the cracking potential was merely that for initiation of cathodic protection; that is the potential at which the current changes from anodic to cathodic. The failure time at constant applied stress increased significantly with amount of deformation indicating a maximum or optimum amount of plastic deformation. For tests conducted at a fixed percentage of the yield strength, the failure time decreased with increased amounts of deformation, independent of the type of deformation.
Open the resolved locator · 10.2172/7215744
Metadata licence: OpenAlex metadata (CC0)