Effect of vinyl and phenyl contents of silicone gum on the properties of the elastomers and cellular silicone cushions
William E. Cady, E S Jessup, A.T. Buckner · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · 1980
Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.
OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · Office of Scientific and Technical Information · report · 1980
Abstract
Two series of random terpolymers of dimethyl-diphenyl-methylvinylsiloxane were synthesized. In one series, the amount of methylvinylsiloxane was varied from 0 to 5 wt % and diphenylsiloxane was maintained at a nominal 12 wt %. In the other series, diphenylsiloxane was varied from 0 to 18 wt % and methylvinylsiloxane was maintained at a nominal 1 wt %. Molecular weights were maintained around 500,000. These gums were filled with about 26 wt % silicon dioxide and then converted to the intermediate elastomers, temporarily filled molding compounds, and cellular silicone cushions. The intermediate elastomers and cellular silicones were cured with a vinyl specific catalyst and tested.
Increasing vinyl content increases the stiffness of the cushion but decreases its resiliency. Compression set reaches a minimum of about 5% at a methylvinylsiloxane content of about 0.9 wt %. Phenyl content has only a slight effect on cushion properties. Compression set is a minimum in a range of 7 to 14 wt % diphenylsiloxane.
Open the resolved locator · 10.2172/6830698
Metadata licence: OpenAlex metadata (CC0)