New high-efficiency silicon solar cells. Final report, August 11, 1983-February 28, 1985
T. Daud, G. T. Crotty · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · 1985
Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.
OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · Office of Scientific and Technical Information · report · 1985
Abstract
A new design for silicon solar cells was investigated as an approach to increasing the cell open-circuit voltage and efficiency for flat-plate terrestrial photovoltaic applications. This deviates from past designs for such applications, where either the entire front surface of the cell is covered by a planar junction or the surface is textured before junction formation, which results in an even greater (up to 70%) junction area. The heavily doped front region and the junction space charge region are potential areas of high recombination for generated and injected minority carriers.
The new design reduces junction area by spreading equidiameter dot junctions across the surface of the cell, spaced about a diffusion length or less from each other. Various dot diameters and spacings allowed variations in total junction area. A simplified analysis was done to obtain a first-order design optimization. Efficiencies of up to 19% can be obtained. Cell fabrication involved extra masking steps for selective junction diffusion, and made surface passivation a key element in obtaining good collection. It also involved photolithography, with line widths down to 5 ..mu..m. A method is demonstrated for achieving potentially high open-circuit voltages and solar-cell efficiencies.
Open the resolved locator · 10.2172/5701774
Metadata licence: OpenAlex metadata (CC0)