DESCRIPTION OF A CAPSULE FOR IRRADIATION OF FUEL SPECIMENS AT HIGH TEMPERATURES
S.J. Basham, J.H. Stang, W.H. Goldthwaite, B.W. Dunnington · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · 1959
Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.
OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · Office of Scientific and Technical Information · report · 1959
Abstract
A controlled-temperature irradiation capsule was operated containing small fueled specimens at 160O to 1650 F. The design involved calculating the specimen heat-generation rate and designing an insulating gas gap around the specimens to achieve the desired temperature. Electric heaters were inserted to help control temperature. The thickness and composition of the gas gap were modified prior to operation on the basis of information on probable neutron flux obtained from a nuclear mock-ups and on the basis of information on the thermal resistance of various gas annuli obtained from a thermal mock-up.
The desired irradiation temperature of 1625 F was achieved with a variation of sintering time 25 F. (auth)
Open the resolved locator · 10.2172/4243003
Metadata licence: OpenAlex metadata (CC0)