Direct digital numerical controller for machine tools
Tenn. (USA) Oak Ridge Y-12 Plant, G.L. Bowers, C.M. Lay, Thomas L. Williams · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · 1975
Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.
OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · Office of Scientific and Technical Information · report · 1975
Abstract
A direct digital numerical controller (DDNC) was developed as an alternative to the current numerical control (NC) concept with the expectation of improving the performance and the design criteria for an NC controller.The need for a DDNC was prompted by a program to decrease the time required for machining special, low-volume, custom-made parts.DDNC offers several improvements over commerically available NC, such as: ( 1 ) magnetic core memory replacement of the tape reader during machining, (2) capability of remote loading via a high-speed transmission line from the computer, (3) part-description data stored in highly efficient binary format rather than EIA code, (4) size savings of 75% in required floor space with a significant reduction in circuit components and accompanyi?q maintenance, and (5) greater than -50% cost savings.Full, five-axis, continuous-path contouring (using linear interpolation) is available on the DDNC with manual control features basically the same as those found on NC units.DDNC units were installed on three Ex-Cell-0 two-axis turning machines, and a number of parts were machined.DDNC proved to be a practical, economical, and reliable method for machine-tool control.
Open the resolved locator · 10.2172/4222643
Metadata licence: OpenAlex metadata (CC0)