go-v.orgdoi

PRELIMINARY HOT SPOT ANALYSIS OF THE HFIR

N. Hilvety · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · 1960

  • DOI 10.2172/4164352
  • Publisher Office of Scientific and Technical Information
  • Type report
  • Issued 1960

Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.

OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · Office of Scientific and Technical Information · report · 1960

Abstract

The effects of variations in HFIR design tolerances and uncertainty factors on hot spot, hot channel, and burnout margin factors have been calculated via the IBM 704. Graphs are presented of hot spot and hot channel factors and burnout margin factors as a function of each of these variables. These graphs may be used in establishing permissible design tolerances, and to calculate over- all hot spot, hot channel, and burnout margin factors. Also included are plots showing the effects of operating pressure and flow variations on burnout.

Based on the current HFIR core design, the maximum fuel plate (oxide surface) temperature is estimated to be 362 deg F with a maximum hot spot heat flux of 1.4 x 10/sup 6/ Btu/hr-ft/sup 2/. The minimum burnout heat flux for this reactor geometry is calculated to be a factor of 2.51 above the maximum operating heat flux. (auth)

Open the resolved locator · 10.2172/4164352

Metadata licence: OpenAlex metadata (CC0)

Registry
OpenAlex DOI index + API
Fetched
2026-11-20 01:29 UTC
Cache state
not cached yet (bulk-index+openalex)
Locator
https://www.osti.gov/servlets/purl/4164352
Metadata licence
OpenAlex metadata (CC0)
Scope
Metadata as returned by the resolver; abstracts are never generated here.