Industrial application for the Los Alamos Materials Modeling Platform
NM (United States) Los Alamos National Lab., Richard A. LeSar, USDOE, Washington, DC (United States) (US), Ch. Charbon, D.B. Kothe, D Wu, A Reddy · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · 1996
Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.
OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · Office of Scientific and Technical Information · report · 1996
Abstract
This is the final report of a one-year, Laboratory-Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). Casting and solidification of molten metals and metal alloys is a critical step in the production of high-quality metal stock and in the fabrication of finished parts. Control of the casting process can be the determining factor in both the quality and cost of the final metal product.
Major problems with the quality of cast stock or finished parts can arise because of the difficulty of preventing variations in the alloy content, the generation of porosity or poor surface finish, and the loss of microstructure controlled strength and toughness resulting from the poor understanding and design of the mold filling and solidification processes. In this project, we sought to develop a new set of applications focused on adding the ability to accurately model solidification and grain growth to casting simulations.
We implemented these applications within the Los Alamos Materials Modeling Platform, LAMMP, a graphical-based materials, and materials modeling environment being created at the Computational Testbed for Industry.
Open the resolved locator · 10.2172/369681
Metadata licence: OpenAlex metadata (CC0)