High temperature properties of alloys being considered for design of a concentric canister launcher
Michael Ernest Kassner, R Lowry, Robert S. Rosen · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · 1998
Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.
OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · Office of Scientific and Technical Information · report · 1998
Abstract
This report describes a study to determine the high temperature mechanical properties of several titanium alloys and to compare them with properties of AISI 316L stainless steel and ASTM A 387 structural steel. The steel materials are less costly to procure but exhibit good resistance to corrosion in seawater environments. Six titanium alloys were evaluated as candidate materials for use in a c Concentric Canister Launcher (CCL). Each titanium alloy was tested at three temperatures (68°, 2000°F, and 2400°F). Strain-rate changes tests were used to determine the strain rate sensitivity of the alloys at each test temperature.
Optical metallography was performed on two of the alloys to determine the relationship between test temperature and microstructure (presence of second phase precipitates, grain size). Complete test results are includes, a long with figures and tables of test data.
Open the resolved locator · 10.2172/3453
Metadata licence: OpenAlex metadata (CC0)