FED-A, an advanced performance FED based on low safety factor and current drive
Yueng Kay Martin Peng, Paul H. Rutherford, John T. Hogan, Stanley E. Attenberger, J.A. Holmes, Stanley K. Borowski, T. Brown, B. A. Carreras, David A. Ehst, John R Haines, L.M. Hively, Wayne A. Houlberg, H. Iida, V.D. Lee, S.J. Lynch, R. Lowell Reid, Kristin E. Rothe, Dennis J. Strickler, L.D. Stewart · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · 1983
Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.
OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · Office of Scientific and Technical Information · report · 1983
Abstract
This document is one of four describing studies performed in FY 1982 within the context of the Fusion Engineering Device (FED) Program for the Office of Fusion Energy, U.S. Department of Energy. The documents are: 1. FED Baseline Engineering Studies (ORNL/FEDC-82/2), 2. FED-A, An Advanced Performance FED Based on Low Safety Factor and Current Drive (this document), 3. FED-R, A Fusion Device Utilizing Resistive Magnets (ORNL/FEDC-82/1), and 4. Technology Demonstration Facility TDF. These studies extend the FED Baseline concept of FY 1981 and develop innovative and alternative concepts for the FED.
The FED-A study project was carried out as part of the Innovative and Alternative Tokamak FED studies, under the direction of P. H. Rutherford, which were part of the national FED program during FY 1982. The studies were performed jointly by senior scientists in the magnetic fusion community and the staff of the Fusion Engineering Design Center (FEDC). Y-K. M. Peng of the FEDC, on assignment from Oak Ridge National Laboratory, served as the design manager.
Open the resolved locator · 10.2172/1024792
Metadata licence: OpenAlex metadata (CC0)