"On the impact of micro- and nanostructural characteristics on the deformation behavior and mechanical properties of high- and medium-manganese steels"
Simon Sevsek · RWTH Publications (RWTH Aachen) · 2019
Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.
RWTH Publications (RWTH Aachen) · RWTH Aachen University · dissertation · 2019
Abstract
Owing to substantial efforts of the scientific community, the remarkable mechanical properties of high-manganese steels (HMnS) and medium-manganese steels (MMnS) have led to their emergence as candidates for lightweight, structural components in the automotive industry. By adjusting the stacking fault energy (SFE) and the microstructure, the strain hardening behavior can be tailored to achieve a broad range of strength-ductility combinations.
Despite the advantages and opportunities these alloys offer, a limited fundamental understanding of various metallurgical parameters has prevented the establishment of HMnS and MMnS as a replacement for conventional high-strength steels.In the interest of furthering the understanding of the mechanical properties of HMnS and MMnS, this thesis analyzes the impact and scale-bridging interplay of different micro- and nanostructural features on the yield strength and the deformation behavior.
To this end, the experimental determination of the mechanical properties of several alloys via tensile testing was combined with the microstructural characterization by means of optical microscopy, scanning electron microscopy, electron backscatter diffraction (EBSD) and X-ray diffraction (XRD) experiments, energy-dispersive X-ray spectroscopy and in-situ digital image correlation (DIC) techniques.
Additionally, a simulation approach based on the density functional theory was developed to quantify the influence of nanoscale short-range ordered clusters on the macroscopic mechanical properties.Integrating data from density-functional-theory-based simulations into a modelling approach for HMnS revealed the impact of short-range ordered clusters on the yield strength. This allowed for the quantification of the individual impact of C, Mn and Al on the yield strength both in terms of short-range ordering and solid solution strengthening.
While the impact of alloying additions of C and Al to the contribution of short-range ordered clusters to the yield strength within the usual range of chemical compositions of HMnS was very effective, the high alloying contents of Mn in HMnS limited the effectiveness of further Mn additions.The analysis of deformation-induced twinning (TWIP) during plastic deformation in two HMnS showed that short-range ordered clusters affect the strain hardening behavior by means of short-range-ordering-assisted deformation twinning.
Further analysis of the deformation behavior in fully-recrystallized, partially-recrystallized and recovery-annealed material states at different testing temperatures disclosed that the orientation-dependent localized activation of the TWIP effect on the microscale was responsible for the occurrence of serrated flow curves. Accordingly, it was shown that short-range ordering on the nanoscale significantly affects the deformation behavior on the microscale, which in turn determines the mechanical properties on the macroscale.
Subsequent XRD, macrotexture and EBSD experiments regarding the impact of grain size showed that while the fine-grained materials had significantly higher yield strengths, the activation of the TWIP effect and the deformation-induced phase transformation (TRIP) to martensite was partially suppressed.The findings on the importance of the initial microstructure for both yield strength and strain hardening behavior in HMnS were put into context of a multi-phase MMnS.
Using interrupted and in-situ DIC tensile tests at different strain rates coupled with EBSD experiments, it was shown that the strain-rate sensitivity of the MMnS on the macroscale was driven by the strain-rate-dependent strain-partitioning and phase-transformation behavior on the microscale.Finally, the influences of the microstructure of HMnS and MMnS on the yield strength and strain hardening behavior were analyzed, compared and put into the context of the impact of microstructural homogeneity on the mechanical properties. To conclude, the possibility of adjusting the yield strength and the strain hardening behavior independently by tailoring the microstructure was discussed.
Open the resolved locator · 10.18154/rwth-2019-05913
Metadata licence: OpenAlex metadata (CC0)